3D Laser Marking Machine

Dynamic-focus 3D galvo keeps the beam sharp on curved, stepped and inclined surfaces — and engraves deep 3D relief.

Scanner3D dynamic focus
Power20–100 W
Area300 × 300 mm
Input3D models (STL)
Get a quoteSee samples
3D Laser Marking Machine
OverviewWhat it doesSpecsFormatsSamplesIndustriesAccessoriesFAQ
3D relief engraved on stone

Overview

3D marking — 1064 nm

A fiber source paired with a 3-axis dynamic-focus scanner moves the focal point up and down while marking, so the mark stays crisp across curves, steps and slopes without moving the part. It also builds layer-by-layer 3D relief engraving for moulds, coins and branding dies.

MaterialsStainless steelMild & tool steelAluminiumBrass & copperTitaniumEngineering plastics

What it does

Dedicated work this machine performs.

01Curved surfaces

Marks on cylinders, spheres, domes and bottle shoulders in one pass.

02Stepped parts

Different heights marked in one job — no refocusing between levels.

033D relief engraving

Deep sculpted engraving from 3D models for moulds, coins and dies.

04Large fields

Bigger marking area with even spot size from centre to edge.

Specifications

Technical data

Representative ranges — final spec configured per order.

Laser sourceFiber 20 / 30 / 50 / 100 WMOPA option for colour and fine marking.
Wavelength1064 nm
Scanner3-axis dynamic-focus galvoFocus moves in Z while marking.
Z focus rangeConfigured per orderFor curved and stepped parts.
Marking areaUp to 300 × 300 mm
Software3D marking & relief engravingSTL import, surface mapping, layer slicing.
CoolingAir

Formats

4 ways to build it.

Tabletop
TabletopCompact bench unit for job shops and labs.
Enclosed
EnclosedClass-1 safety cabin with door interlock.
Robotic
Robotic6-axis robot integration for 3D parts.
Customised
CustomisedFixtures, rotary, multi-head — built to spec.

Samples

Work done on this machine.

Deep 3D relief in steel
Deep 3D relief in steelSteel
Raised lettering on a plate
Raised lettering on a plateStainless steel
Relief on stone
Relief on stoneStone
Letter punches
Letter punchesTool steel
Pattern on a curved surface
Pattern on a curved surfacePlastic
Marks on curved shapes
Marks on curved shapesVarious
Laser surface texturing
Laser surface texturingSteel

Have a part? Send it for a free sample.

Industries

Where this machine is used.

AutomotiveSerial numbers, VIN, barcodes and logos on partsTool manufacturingIdentification and branding on toolsJewellery & luxuryIntricate engraving and personalisationMedicalUDI on surgical instruments and devices

Accessories & options

Configure it your way.

Choose the laser source, add attachments and pick the galvo scanner. We build and test the machine with exactly this setup.

Send this configurationBrowse all accessories & spares
Raycus
JPT MOPA
MAX
FIT
CRD
Davi

FAQ

Common questions

When do I need 3D marking instead of a standard marker?

When the surface is curved, stepped or sloped by more than a few millimetres, or when you need sculpted 3D relief. A standard marker loses focus on such parts.

Can it engrave from a 3D model?

Yes — import an STL and the software slices it into layers for deep relief engraving.

Sample first, buy second.

Send your part — we run it on the 3D marking and send photos back. Need it customised or integrated into your line? We build that too.

Request sampleWhatsApp