Handheld Laser Welding Machine

Wobble-head gun with wire feeder — weld, clean and cut on one machine. Learn it in a day.

Power1.5–3 kW
SS up to5 mm
Fibre10 m
ModesWeld · Clean · Cut
Get a quoteSee samples
Handheld Laser Welding Machine
OverviewWhat it doesSpecsFormatsSamplesIndustriesAccessoriesFAQ

Overview

Handheld — 1080 nm

A 1.5–3 kW continuous-wave fiber source, 10 m fibre and a lightweight wobble gun. Up to 4× faster than TIG with almost no distortion or post-grinding — ideal for stainless cabinets, railings, kitchen equipment and repair.

MaterialsStainless steelMild steelAluminiumGalvanised sheetBrass / copper (3 kW)

What it does

Dedicated work this machine performs.

01Welding

SS, MS to 5 mm and aluminium to 3 mm in a single pass.

02Cleaning

Pre-weld oxide removal and post-weld seam cleaning.

03Cutting

Light cutting of thin sheet with the cut nozzle.

04Wire feed

0.8–1.6 mm wire for gap bridging and fillet builds.

Specifications

Technical data

Representative ranges — final spec configured per order.

Laser power1500 / 2000 / 3000 WRaycus / MAX / JPT CW source.
Wavelength1080 nm
Weld thicknessSS 0.5–5 mm · MS 0.5–5 mm · Al 0.5–3 mmSingle pass at 2 kW.
Fibre cable10 m15 m optional.
Wobble width0 – 5 mm
Wire feeder0.8 – 1.6 mmAuto feed, synced to trigger.
CoolingBuilt-in water chiller
Shielding gasArgon / nitrogen
SafetyTouch-sensing nozzle, goggles, key switch

Formats

4 ways to build it.

Handheld
HandheldWobble welding gun with wire feeder on a mobile cabinet.
Automated
AutomatedWorkstation with motorised axes and CCD positioning.
Robotic
Robotic6-axis robot carrying the welding head for 3D seams.
Customised
CustomisedGantry workstation and fixtures built around your part.

Samples

Work done on this machine.

Seam on a stainless tube
Seam on a stainless tubeStainless steel
Welded angles and boxes
Welded angles and boxesStainless steel
Fillet welds on angle
Fillet welds on angleMild steel
Welded pipe tee
Welded pipe teeStainless steel
Curved sheet joint
Curved sheet jointStainless steel
Rust removed by laser cleaning
Rust removed by laser cleaningMild steel

Have a part? Send it for a free sample.

Industries

Where this machine is used.

Sheet-metal fabricationCabinets, enclosures, railings, kitchen equipmentConstructionPipes, profiles and metal componentsFurniturePanels, decorative screens, laminatesAutomotiveSerial numbers, VIN, barcodes and logos on parts

Accessories & options

Configure it your way.

Choose the laser source and add attachments. We build and test the machine with exactly this setup.

Send this configurationBrowse all accessories & spares
Raycus
MAX
BWT
IPG

FAQ

Common questions

Is it safe in an open shop?

The gun only fires when the touch-sensing nozzle contacts metal; goggles and a screen are supplied and we train at installation.

Running cost?

About 6–8 units/hour at 2 kW plus argon and wire — no electrodes or tungsten.

Sample first, buy second.

Send your part — we run it on the Handheld and send photos back. Need it customised or integrated into your line? We build that too.

Request sampleWhatsApp