Laser Welding Machines
Handheld fiber laser welding that any operator learns in a day, and automated cells for repeatable production seams. Up to 4× faster than TIG with minimal heat distortion and almost no post-grinding.
Machines in this range
Pick a machine for full details.
1080 nmHandheld Laser Welding Machine
Wobble-head gun with wire feeder — weld, clean and cut on one machine. Learn it in a day.
1080 nmAutomated Laser Welding Platform
XY / rotary fixtures with programmed paths for batteries, sensors, enclosures and precision assemblies.
1080 nmRobotic Laser Welding Cell
6-axis robot with laser head, seam tracking and safety enclosure for automotive and high-volume fabrication.
1064 nmNd:YAG Laser Welding Machine
Pulsed Nd:YAG welder for precise spot and seam welds on moulds, jewellery and small components.
Machine types
Handheld, automated or robotic.
Handheld welding
Wobble-head gun with wire feeder. Weld, clean and cut modes on one machine. Ideal for cabinets, railings, kitchen equipment and repair.
Automated platform
XY / rotary fixtures with programmable paths for batteries, sensors, enclosures and precision assemblies.
Robotic cell
6-axis robot with laser head, seam tracking and safety enclosure for automotive and high-volume fabrication.
Why laser
Laser vs TIG vs MIG
| Laser | TIG | MIG | |
| Speed | Up to 4× TIG | Slow | Medium |
| Heat distortion | Very low | High | High |
| Post-finishing | Minimal | Grinding needed | Grinding & spatter |
| Operator skill | 1-day training | Years | Months |
| Thin sheet (0.5 mm) | Yes | Difficult | Burn-through |
| Consumables | Wire, gas, protective lens | Tungsten, gas, rod | Wire, gas, tips |
Specifications
Handheld welder — technical data
Representative ranges — final spec is configured per order.
| Laser power | 1500 / 2000 / 3000 WRaycus / MAX / JPT continuous-wave source. |
|---|---|
| Wavelength | 1080 nm |
| Weld thickness | SS 0.5 – 5 mm · MS 0.5 – 5 mm · Al 0.5 – 3 mmSingle pass at 2 kW. |
| Fibre cable | 10 m15 m optional. |
| Wobble width | 0 – 5 mm |
| Wire feeder | 0.8 – 1.6 mm wireAuto feed, synced to trigger. |
| Modes | Weld · Clean · Cut |
| Cooling | Built-in water chiller |
| Shielding gas | Argon / nitrogen |
| Safety | Touch-sensing nozzle, goggles, key switch |
Applications
Where handheld laser welding pays off.
- Stainless cabinets, kitchen & pharma equipment
- Railings, gates, doors and window frames
- Sheet-metal enclosures and HVAC ducting
- Aluminium frames, EV battery trays and bus-bars
- Repair and rework on the shop floor
FAQ
Common questions
Is it safe to use in an open shop?
The gun only fires when the touch-sensing nozzle contacts metal; operators wear 1080 nm goggles and a welding screen is recommended. We provide safety training at installation.
Can it weld aluminium and copper?
Aluminium up to 3 mm at 2 kW, yes. Copper and brass need 3 kW and a suitable wire; we'll test your part first.
What is the running cost?
Roughly 6–8 units of power per hour at 2 kW plus argon and wire. No consumable electrodes or tungsten.
Do you offer AMC?
Yes — annual maintenance contracts covering chiller service, lens replacement and calibration.
Weld your own part at our works.
Bring the job. Leave with a seam and a quote.