Fiber Laser Sheet Cutting Machine

Gantry fiber cutter for MS, SS, aluminium, brass and copper sheet up to 20 mm.

Power1.5–6 kW
Bed3000 × 1500 mm
MS up to20 mm
Accuracy± 0.03 mm
Get a quoteSee samples
Fiber Laser Sheet Cutting Machine
OverviewWhat it doesSpecsFormatsSamplesIndustriesAccessoriesFAQ
Laser-cut metal bracket

Overview

Fiber sheet — 1080 nm

An enclosed or open-bed gantry with a 1.5–6 kW fiber source, auto-focus cutting head and CypCut nesting. Exchange table keeps the machine cutting while the next sheet is loaded.

MaterialsMild steelStainless steelAluminiumBrassCopperGalvanised sheet

What it does

Dedicated work this machine performs.

01Sheet cutting

MS to 20 mm, SS to 10 mm, aluminium to 8 mm at 3 kW.

02Fine contour

± 0.03 mm positioning for brackets, gears and panels.

03Nesting

Automatic nesting from DXF for minimum scrap.

04Marking + cutting

Low-power etch of part numbers before the cut.

Specifications

Technical data

Representative ranges — final spec configured per order.

Laser power1.5 / 2 / 3 / 4 / 6 kWRaycus, MAX, JPT or IPG sources.
Working area3000 × 1500 mm4000 × 2000 mm optional.
Max cutting thicknessMS 20 mm · SS 10 mm · Al 8 mmAt 3 kW.
Positioning accuracy± 0.03 mm
Max travel speed100 m/min
Cutting headAuto-focusRayTools / WSX / BOCHU compatible.
ControlCypCut / BOCHUNesting software included.
CoolingIndustrial chiller

Formats

2 ways to build it.

Enclosed
EnclosedFull enclosure with exchange table and fume extraction.
Customised
CustomisedOpen-bed gantry in the bed size and power you need.

Samples

Work done on this machine.

Cut steel bracket
Cut steel bracketMild steel
Formed profile parts
Formed profile partsSteel sheet
Plate with fine features
Plate with fine featuresStainless steel
Decorative cut panel
Decorative cut panelStainless steel
Cut and folded model
Cut and folded modelAluminium sheet

Have a part? Send it for a free sample.

Industries

Where this machine is used.

Sheet-metal fabricationCabinets, enclosures, railings, kitchen equipmentAutomotiveSerial numbers, VIN, barcodes and logos on partsConstructionPipes, profiles and metal componentsEV & batteriesBattery trays, bus-bars, tab welding

Accessories & options

Configure it your way.

Choose the laser source, add attachments and pick the optics. We build and test the machine with exactly this setup.

Send this configurationBrowse all accessories & spares
Raycus
MAX
BWT
IPG

FAQ

Common questions

What power do I need?

MS to 10 mm / SS to 5 mm: 1.5–2 kW. Thicker plate or higher speed: 3–6 kW.

Oxygen or nitrogen?

Oxygen for thick MS; nitrogen or compressed air for SS, aluminium and clean thin MS.

Sample first, buy second.

Send your part — we run it on the Fiber sheet and send photos back. Need it customised or integrated into your line? We build that too.

Request sampleWhatsApp