Laser Micromachining System
Micron-level cutting, drilling, scribing and patterning of thin metals, films, glass and ceramics.
Overview
Micromachining — 355 / 532 / 1064 nm
Nanosecond, picosecond or femtosecond lasers with a galvo scanner and precision XY stages machine features too small or delicate for conventional tools — with a tiny heat-affected zone and burr-free edges.
What it does
Dedicated work this machine performs.
Stents, shims, stencils and fine profiles in thin metal foil.
Small holes in metal, ceramic, glass and polymer.
Wafers, ceramics, solar cells and glass.
Selective removal of coatings, ITO and conductive layers.
Functional textures on moulds and implants.
Specifications
Technical data
Representative ranges — final spec configured per order.
| Laser source | Nanosecond, picosecond or femtosecondChosen for material and feature size. |
|---|---|
| Wavelength | 355 / 532 / 1064 nmUV for the finest features and least heat. |
| Motion | Galvo scanner + precision XY stageLinear-motor stages optional. |
| Positioning accuracy | Down to ± 2 µmDepends on stage configuration. |
| Vision | CCD camera alignmentFiducial recognition for repeat placement. |
| Work area | 100 × 100 to 300 × 300 mmConfigured per order. |
| Software | DXF / Gerber importRecipe library per material. |
Formats
3 ways to build it.
Samples
Work done on this machine.
Have a part? Send it for a free sample.
Accessories & options
Configure it your way.
Choose the laser source, add attachments and pick the motion & control. We build and test the machine with exactly this setup.
FAQ
Common questions
Nanosecond, picosecond or femtosecond?
Shorter pulses mean less heat and cleaner edges. We test your part and recommend the pulse width that gives the quality you need at the lowest cost.
What is the smallest feature?
It depends on material and thickness — send a drawing and we will confirm what is achievable.
Other processing machines
Also in Laser Processing
1070 nmLaser Cladding Machine
Fuse a wear- or corrosion-resistant metal layer onto shafts, rolls and dies — rebuild worn parts instead of replacing them.
1070 nmMetal 3D Printer (SLM)
Selective laser melting builds dense metal parts layer by layer — complex geometry, no tooling.
1064 nm / 10.6 µmLarge Format Laser Marking Machine
Gantry-mounted laser head marks and engraves oversized sheets, panels and heavy parts in one setup.
Sample first, buy second.
Send your part — we run it on the Micromachining and send photos back. Need it customised or integrated into your line? We build that too.