Laser Cutting Machines
Fiber laser cutting for sheet metal and pipe; CO2 cutting for acrylic, wood, MDF, leather and fabric. Clean, burr-free edges at production speed — no dies, no tooling changes.
Machines in this range
Pick a machine for full details.
1080 nmFiber Laser Sheet Cutting Machine
Gantry fiber cutter for MS, SS, aluminium, brass and copper sheet up to 20 mm.
1080 nmFiber Laser Pipe & Profile Cutting Machine
Rotary-chuck cutting of round, square and rectangular tube — holes, slots, notches and mitres in one clamp.
10.6 µmCO2 Laser Cutting & Engraving Machine
Flatbed CO2 for acrylic, wood, MDF, leather, paper, foam and textile — cut and engrave on one machine.
355 / 532 / 1064 nmLaser Micromachining System
Micron-level cutting, drilling, scribing and patterning of thin metals, films, glass and ceramics.
Machine types
Built around your sheet, pipe or panel.
Fiber sheet cutting
Enclosed or open-bed gantry for MS, SS, aluminium, brass and copper sheet. Exchange table option for continuous loading.
Fiber pipe & profile cutting
Rotary chuck cutting of round, square and rectangular tube — holes, slots, notches and mitres in one clamp.
CO2 cutting & engraving
Flatbed CO2 for acrylic, wood, MDF, leather, paper, foam and textile — signage, gifting, garment and packaging shops.
Specifications
Technical data
Representative ranges — final spec is configured per order.
| Laser power | 1.5 / 2 / 3 / 4 / 6 kWRaycus, MAX, JPT or IPG sources. |
|---|---|
| Working area | 3000 × 1500 mm4000 × 2000 mm optional. |
| Max cutting thickness | MS 20 mm · SS 10 mm · Al 8 mmAt 3 kW; higher power extends range. |
| Positioning accuracy | ± 0.03 mm |
| Max travel speed | 100 m/min |
| Cutting head | Auto-focusRayTools / WSX / BOCHU compatible. |
| Control | CypCut / BOCHUNesting software included. |
| Cooling | Industrial chiller |
| Laser power | 1.5 – 3 kW |
|---|---|
| Pipe diameter | Ø 20 – 220 mmRound, square, rectangular, oval. |
| Pipe length | 6 m9 m optional. |
| Chuck | Pneumatic, self-centering |
| Loading | Manual / semi-auto / auto bundle loader |
| Control | TubePro / BOCHU |
| Laser power | 60 / 80 / 100 / 150 / 300 WReci / Yongli glass tube or RF metal tube. |
|---|---|
| Working area | 1300 × 900 mm1600 × 1000 mm and custom sizes. |
| Cut thickness | Acrylic 25 mm · MDF 18 mmAt 150 W. |
| Engraving speed | Up to 1000 mm/s |
| Table | Honeycomb / knife bladeMotorised Z, rotary attachment optional. |
| Control | RDWorks / LightBurn |
Materials
What it cuts.
Fiber — metals
- Mild steel
- Stainless steel
- Aluminium
- Brass
- Copper
- Galvanised
CO2 — non-metals
- Acrylic
- Wood / MDF / plywood
- Leather
- Fabric
- Paper / card
- Foam / rubber
Typical customers
- Fabrication shops
- Sheet metal OEMs
- Signage
- Furniture
- Garment & leather
- Kitchen & HVAC
How we deliver
From enquiry to first cut.
Send your drawing and material; we cut a sample and share edge photos.
Power, bed size, head, chiller and automation chosen for your throughput.
Assembled in India; you inspect and test-cut before dispatch.
Commissioning, operator training and nesting software setup at your site.
FAQ
Common questions
Fiber or CO2 for my shop?
Metals → Fiber. Acrylic, wood, leather, fabric → CO2. If you cut both, we can quote two machines or a fiber machine plus a smaller CO2 flatbed.
What power do I need?
For MS up to 10 mm and SS up to 5 mm, 1.5–2 kW is usually enough. For thicker plate or higher speed, 3–6 kW. Tell us your thickest job and daily volume.
Do I need nitrogen or oxygen?
Oxygen for thick MS; nitrogen or compressed air for SS, aluminium and clean-edge thin MS. We supply air-compressor and gas-line guidance with the machine.
Service and spares?
Lenses, nozzles, ceramic rings and protective windows are stocked in India. Our engineers cover Maharashtra on-site; remote support nationwide.
Send a drawing. Get a sample cut.
DXF or PDF plus material and thickness is enough to start.